Description
The HaulerBiner has three  pulley wheels incorporated into each Karabiner, creating a compact and lightweight 6:1 or 7:1 (theoretical) Mechanical Advantage system. The HaulerBiner also has a purpose-designed progress capture cam with, an ‘on/off’ position.  The HaulerBiner utilizes purpose-developed 6mm rope, for strength and easy handling/best grip.  The kit is supplied in a two-pouch bag, for easy deployment.
The HaulerBiner is load rated to 140kg but it has an MBS of at least 16kN tested as a complete system. Â Kits are available in three standard lengths; 105cm, 165cm or 300cm, with custom lengths available on request. Â The length of the system, when fully contracted is only 32cm!
The HaulerBiner can be used in a number of ways:
- As part of a pick-off system
- On a structure, pull down on the system and achieve a 6:1 (theoretical) MA
- When suspended in a harness, pull up on the system and achieve a 7:1(theoretical) MA
- With a D4/D2 Descender, as part of a short-haul / long-lower system
- As a tensioning system for short/low load lines
- As a stretcher management device, using two or more HaulerBiners to easily change or adjust the orientation of the stretcher
Specifications
(WLL) Working Load Limit (kg): 140
(WLL) Working Load Limit (lbs): 308
(MBS) Minimum Breaking Strength (kN): 16
(MBS) Minimum Breaking Strength (lbf): 3596
Serial numbering: As standard
EZYiD: Available on request
Gate/lock type: Supersafe
Approved Standards: Meets EN 12278 and EN567
